Not so worn anymore

Yipee - I have ordered some new tyres for the bike (Panaracer FR), you will remember that I said that the ones that came on the wheels were pretty worn. Well the more I looked at the them, the more I felt that the only place they would grip was if I was running at a forty five degree angle. So in the interests of being able to ride the bike straight out of the traps I decided to bite the bullet.

Of course the useful thing about this was that I was able to order an ISIS splined bottom bracket tool for £6 with free P&P. Just need to get my lockring wrench back from uncle Riotous and that little job can be completed as well. See already I am forced down an evolutionary path by the simple design choices that are available. It gives the manufacturers a niche in which to operate for a minimum cost, and now keeps me locked into an evolutionary pathway that will probably see me riding a sportive or triathalon bike in my old age.

Parts buying

Right we are almost upto date - the previous sections cover the last month, and in that time I have not been quiet on the sourcing some second hand or cheap parts. A pair of SRAM X.7 shifters of which I now only need one now from ebay. Along with some sale front and rear mechs SRAM X.7 and sale XT Brake arms from Chainreactioncycles.com. Then there are the front and rear Deore SL mechs I bought off ebay and then decided to divert these to a new project (my hybrid). So far no luck on bidding for new wheel/s for a 9+ speed and I realise that the current hub may take a 9 speed cassette as a result of its relative youth. It was clearly a bike put together with the cheapest parts to retail at the highest sales value before the buyer realised they were ripped off (sorry G but you said it). So I need to get it to Professor Riotous for an assessment as I have never seen a hub that accepts 9 compared with one that accepts 7 speed cassettes. Oh and I have double stocked on cables as well.

Current ebay pursuit is a Truvativ Hussefelt Cranks with Chain Guide, handily in Whyteleaf, various potential front forks (including a Z5) and an XT rear mech. I have as a result of being forced into a single chainset decided to try and return the bike to its original setup as much as possible.

first small steps

The frame is far from the mint proclaimed, but then I never expected mint. Who keeps a frame in the garage that long without using it? Expecting to have only minor touch up on the paintwork, I'm a little disappointed to find some relatively large tool marks from where they frame has been stripped. A minor bit of epoxy filler work is all that is required, but the more I look at it the more the frame seems to require than the simple touch up paint routine. My heart sinks - its a respray job. I haven't done one of those since I was given my grandfather's fixie to do up when I was 13. There are several nightmare moments that await a respray - 1. you are only going to chip the paint again. 2. the pro companies use kilns to harden the paint 3. a spray gun is better than any other method. So no kiln and no spray gun and bearing mind issue number one I go for the overcoat method. Here the aim is to prep the surface to hold paint - apply a primer and then several coats of car paint.

Set up with some old dust sheets in the very small shed at the end of the garden I set to work with primer. Wow, I'm not bad at this, the old skills haven't completely gone. Nice even coat with no show through. Damn I've left a sticker on the frame!! Bugger it, I'll leave it as this a cover up not a vanity job.

Matt black goes on well and I have managed to find a sign printer who runs of decals, so I can brand the bike for those who care about such things. It seems that finally I am ready to start the swap from one bike to the next. All I need to do is start sourcing components required to upgrade the bike.